The Case for Press-Fit
Faster installs. Safer sites. Better joints.
Press-fit copper is changing how HVAC/R pipework gets installed in South Africa — and for good reason. Here's what it means for your job.
Get a QuoteFaster on Site
A press joint takes seconds. No braze setup, no cool-down, no cleaning oxide off the inside of the pipe.
Flame-Free & Safer
No open flame means no hot works permits, no fire watch, and no risk of igniting insulation or overheads.
Consistent Every Time
The tool does the work. Every joint is pressed to the same specification — no installer-to-installer variance.
Leak-Proof & Certified
Sanha ACR fittings are engineered and certified for refrigerant service. Correctly pressed, they hold.
Press-Fit vs Brazed
At a glance
| Consideration | Press-Fit | Brazed |
|---|---|---|
| Time per joint | Seconds | Several minutes |
| Flame required | No | Yes — hot works permit often needed |
| Skill dependency | Low — tool-controlled | High — installer skill critical |
| Oxide / scale inside pipe | None | Requires nitrogen purge to prevent |
| Ideal for retrofits | Yes — safe in occupied spaces | Restricted — flame hazards |
Ready to switch to press-fit?
We'll help you spec the right Sanha fittings and Novopress tool for your first job.
Contact QINISA Grip